Specific Purpose Motors/Explosion Proof Motors/EP Series – 3 Phase Standard Efficiency (IE1) Explosion Proof Induction Motors

EP Series – 3 Phase Standard Efficiency (IE1) Explosion Proof Induction Motors

Categories: ,

EP series three phase explosion proof motors are uniquely designed and built to contain the sparks within the motor to prevent ignition of external combustible vapours contained in the surrounding atmosphere. The explosion proof characteristic enables the motor to be safely used in hazardous environments.

Certifications:
ATEX EExd IIB T4 or EExd I
ATEX EExd IIC T4

 

Item Standard Specifications
Type of Motor Totally-enclosed fan-cooled squirrel cage induction motor
Design standards German DIN42673 IEC79-1, BS4683, EN50018
Time Duty Continuous S1, MCR (S.F:1.0)
Cooling Method self external fan, surface cooling (IC 411)
Method of Starting Full voltage direct on line starting or star-delta starting
Mounting Horizontal foot mounting, flange mounting: B3. B5. B14, B35, V1
Insulation class & Temperate Rise Adopting class F insulation and checking permissible limits of temperature rise against that of class B to improve the insulation reliability
Rotor Winding Squirrel cage, aluminium conductor with end-ring and wafter blades integrally cast
Environmental Conditions Place: Hazardous Location
Ambient temperature: -20°C to 40°C
Relative humidity: Less than 90% RH(non-condensation)
Altitude: Up to 1,000 metres above sea level
Drive Method Belt service (Note: Frame Size 225 and above is for coupling drive)
Direction of Rotation Standard motors are suitable for operation in either direction of rotation. Direction of rotation of motor can be reversed by interchanging any two of the power lines
Shaft Carbon Steel, round shaft with key
Bearing Grease pre-packed shielded ball bearing
Lubrication Lithium-base grease
Painting High quality enamel finish, standard colors is light blue with other colors available on request.
Nameplate Stainless steel
Ground Terminal NE set inside the terminal box
Performance Data for 50Hz
Rated Power Pole Frame Size Rated Speed Current Power Factor Efficiency Locked Rotor Current / Locked Rotor Torque / Breakdown Torque / Rated Torque Moment of Inertia Weight
(RPM) IFL (A) (COSØ) (%) Full Load Current Full Load Torque Full Load Torque (TFL) Nm (JKgm²) (Kg)
KW HP 380V 400V 415V (ILR/IFL) (TLR/TFL) (TM/TFL)
0.55 0.75 4 80-1 1390 1.57 1.49 1.44 71 0.75 5 2.4 2.3 3.78 0.01 22
0.75 1 2 80-1 2825 1.83 1.74 1.68 75 0.83 6 2.2 2.3 2.54 0 22
4 80-2 1390 2.03 1.93 1.86 73 0.77 5 2.4 2.3 5.15 0.01 24
1.1 1.5 2 80-2 2825 2.55 2.42 2.33 78 0.84 6 2.2 2.3 3.72 0.01 24
4 90S 1400 2.89 2.75 2.65 75 0.77 6 2.3 2.3 7.5 0.01 33
1.5 2 2 90S 2840 3.43 3.26 3.14 79 0.84 7 2.2 2.3 5.04 0.01 33
4 90S 1400 2.89 2.75 2.65 75 0.77 6 2.3 2.3 10.23 0.01 33
2.2 3 2 90L 2840 4.85 4.61 4.44 81 0.85 7 2.2 2.3 7.4 0.01 37
4 90L 1400 3.71 3.52 3.39 78 0.79 6 2.3 2.3 15.01 0.02 37
3 4 2 100L 2880 6.24 5.93 5.72 83 0.88 7 2.2 2.3 9.95 0.02 43
4 100L-2 1420 5.16 4.9 4.72 80 0.81 6 2.3 2.4 20.18 0.03 43
4 5.5 2 112M 2890 8.12 7.71 7.43 85 0.88 7 2.2 2.3 13.22 0.03 54
4 112M 1440 8.82 8.38 8.08 84 0.82 6 2.3 2.4 26.53 0.06 58
8 160M-1 720 10.31 9.79 9.44 81 0.73 6 1.9 2.2 53.06 0.32 132
5.5 7.5 2 132S-1 2900 11 10.45 10.07 86 0.88 7.5 2.2 2.3 18.11 0.06 79
4 132S 1440 11.6 11.02 10.62 86 0.84 7 2.3 2.4 36.48 0.11 80
8 160M-2 720 13.4 12.73 12.27 83 0.75 6 1.9 2.2 72.95 0.46 144
7.5 10 2 132S-2 2900 14.91 14.16 13.65 87 0.88 7.5 2.2 2.3 24.7 0.07 87
4 132M 1440 15.4 14.63 14.1 87 0.85 7 2.3 2.4 49.74 0.17 95
6 160M 970 16.8 15.96 15.38 86 0.79 6.5 2.1 2.4 73.84 0.46 154
8 160L 720 17.6 16.72 16.12 85 0.76 6 1.9 2.2 99.48 0.61 175
11 15 2 160M-1 2930 21.51 20.43 19.69 88.4 0.88 7.5 2.2 2.4 35.85 0.21 140
4 160M 1460 22.31 21.19 20.42 88 0.85 7 2.2 2.4 71.95 0.36 150
6 160L 970 24.2 22.99 22.16 87.5 0.79 6.5 2.1 2.4 108.3 0.61 176
8 180L 730 25.31 24.04 23.17 87 0.76 6 1.9 2.2 143.9 1.06 225
15 20 2 160M-2 2930 28.6 27.17 26.19 89.4 0.89 7.5 2.2 2.4 48.89 0.25 152
4 160L 1460 30.11 28.6 27.57 89 0.85 7 2.2 2.4 98.12 0.42 168
6 180L 970 31.6 30.02 28.93 89 0.81 7 2.1 2.1 147.68 1.01 225
8 200L 730 33.71 32.02 30.86 89 0.76 6.5 2 2.2 196.23 1.6 315
18.5 25 2 160L 2930 35.11 33.35 32.14 90 0.89 7.5 2.2 2.4 60.3 0.31 168
4 180M 1470 36.51 34.68 33.43 90.5 0.85 7 2.2 2.3 120.19 0.68 220
6 200L-1 970 37.6 35.72 34.43 90 0.83 7 2.2 2.4 182.14 1.62 290
8 225S 730 40 38 36.63 90 0.78 6.5 2 2.2 242.02 2.28 375
22 30 2 180M 2940 41 38.95 37.54 90.5 0.9 7.5 2 2.3 71.46 0.37 220
4 180L 1470 43.11 40.95 39.47 91.2 0.85 7 2.2 2.3 142.93 0.7 242
6 200L-2 970 44.71 42.47 40.93 90 0.83 7 2.2 2.4 216.6 1.84 315
8 225M 730 47.4 45.03 43.4 90.5 0.78 6.5 2 2.2 287.81 2.74 395
30 40 2 200L-1 2950 55.4 52.63 50.73 91.4 0.9 7.5 2 2.4 97.12 0.63 290
4 200L 1470 57.6 54.72 52.74 92 0.86 7.2 2.2 2.4 194.9 0.81 335
6 225M 980 57.6 54.72 52.74 92 0.86 7 2.1 2.4 292.35 2.43 410
8 250M 730 63.4 60.23 58.05 91 0.79 6.5 1.9 2 392.47 3.67 530
37 50 2 200L-2 2950 67.91 64.51 62.18 92 0.9 7.5 2 2.4 119.78 0.73 305
4 225S 1480 69.91 66.41 64.01 92.5 0.87 7.2 2.2 2.4 238.75 1.21 400
6 250M 980 71 67.45 65.01 92 0.86 7 2.1 2.4 360.56 2.68 525
8 280S 740 77.8 73.91 71.24 91.5 0.79 6 1.8 2 477.5 5.16 605
45 60 2 225M 2970 82.11 78 75.18 92.5 0.9 7.5 2 2.3 144.7 1.28 400
4 225M 1480 84.71 80.47 77.56 92.8 0.87 7.2 2.2 2.4 290.37 1.85 415
6 280S 980 85.91 81.61 78.66 92.5 0.86 7 2.1 2.4 438.52 3.46 635
8 280M 740 94.11 89.4 86.17 92 0.79 6 1.8 2 580.74 5.82 700
55 75 2 250M 2970 99.8 94.81 91.38 93 0.9 7.5 2.1 2.3 176.85 1.55 460
4 250M 1480 103.31 98.14 94.59 93 0.87 7.2 2.2 2.4 354.9 2.32 560
6 280M 980 104.71 99.47 95.87 92.8 0.86 7 2.1 2.3 535.97 3.97 730
8 315S 740 111.2 105.64 101.82 92.8 0.81 6.5 1.9 2.2 709.8 6.74 920
75 100 2 280S 2970 133.8 127.11 122.52 93.6 0.91 7.5 2 2.3 241.16 1.89 625
4 280S 1480 139.6 132.62 127.83 93.8 0.87 7.2 2.2 2.4 483.95 2.86 665
6 315S 985 141.71 134.62 129.75 93.5 0.86 7 2 2.2 727.16 4.57 1080
8 315M 740 151.31 143.74 138.54 93 0.81 6.5 1.9 2.2 967.91 7.35 1100
90 125 2 280M 2970 160 152 146.51 93.9 0.91 7.5 2.1 2.3 289.39 2.02 728
4 280M 1485 166.8 158.46 152.73 94.2 0.87 7.2 2.2 2.4 578.79 3.34 780
6 315M 985 169.51 161.03 155.21 93.8 0.86 7 2 2.2 872.59 4.83 1140
8 315L-1 740 177.8 168.91 162.8 93.8 0.82 6.5 1.9 2.2 1161.49 8.79 1120
110 150 2 315S 2980 195.4 185.63 178.92 94 0.91 7 1.8 2.3 352.52 2.26 1100
4 315S 1485 198.71 188.77 181.95 94.5 0.89 7 2.1 2.4 707.41 4.68 1150
6 315L-1 985 206.71 196.37 189.27 94 0.86 7 2 2.2 1066.5 5.32 1310
8 315L-2 740 216.8 205.96 198.52 94 0.82 6.5 1.9 2.2 1419.59 9.18 1300
132 180 2 315M 2980 233.2 221.54 213.53 94.5 0.91 7 1.8 2.3 423.02 2.42 1160
4 315M 1485 237.71 225.82 217.66 94.8 0.89 7 2.1 2.4 848.89 4.96 1200
6 315L-2 985 244.71 232.47 224.07 94.2 0.87 7 2 2.2 1279.8 5.95 1400
8 355S 740 259.6 246.62 237.71 94.2 0.82 6.5 2 2.2 1703.51 10.19 1640
160 215 2 315L-1 2980 279.31 265.34 255.75 94.6 0.92 7 1.8 2.3 512.75 2.76 1350
4 315L-1 1485 284.31 270.09 260.33 95 0.9 7 2.1 2.4 1028.96 5.22 1320
6 355S 985 292.31 277.69 267.65 94.5 0.88 7 2 2.2 1551.27 7.32 1650
8 355M 740 313.4 297.73 286.97 94.6 0.82 6.5 2 2.2 2064.86 11.24 1820
185 250 2 315L 2980 323 306.85 295.76 94.6 0.92 7 1.8 2.3 592.87 3.22 1500
4 315L 1485 328.71 312.27 300.98 95 0.9 7 2.1 2.4 1189.73 5.43 1420
6 355M-1 985 338 321.1 309.49 94.5 0.88 7 2 2.2 1793.65 7.89 1760
8 355L-1 740 362.31 344.19 331.75 94.6 0.82 6.5 2 2.2 2387.5 12.48 2100
200 270 2 315L-2 2980 348.4 330.98 319.02 94.8 0.92 7 1.8 2.3 640.94 3.41 1600
4 315L-2 1485 354.6 336.87 324.69 95.2 0.9 7 2.1 2.3 1286.2 5.62 1500
6 355M-2 985 364.6 346.37 333.85 94.7 0.88 7 2 2.2 1939.09 8.17 1970
8 355L-2 740 386.2 366.89 353.63 94.8 0.83 6.5 2 2.2 2581.08 13.56 220
220 295 2 355M-1 2980 383.2 364.04 350.88 94.8 0.92 7 1.6 2.4 705.03 5.46 1840
4 355M-1 1488 390.11 370.6 357.2 95.2 0.9 7 2.1 2.4 1411.96 6.88 1830
6 355L-1 985 401.11 381.05 367.28 94.7 0.88 7 2 2.2 2132.99 8.25 2140
250 340 2 355M-2 2980 433.2 411.54 396.67 95.3 0.92 7 1.6 2.4 801.17 6.22 2100
4 355M-2 1488 441.91 419.81 404.64 95.5 0.9 7 2.1 2.4 1604.5 7.22 1940
6 355L-2 985 454.31 431.59 415.99 95 0.88 7 2 2.2 2423.86 8.36 2250
280 380 2 355L-1 2980 485.2 460.94 444.28 95.3 0.92 7 1.6 2.4 897.32 6.54 2260
4 355L-1 1488 494.91 470.16 453.17 95.5 0.9 7 2.1 2.4 1797.04 7.46 2080
315 425 2 355L-2 2980 544.11 516.9 498.22 95.6 0.92 7 1.6 2.4 1009.48 6.95 2320
4 355L-2 1488 556.2 528.39 509.29 95.6 0.9 7 2.1 2.4 2021.67 7.68 2260

The table below contains the various types of mounting that this series of motors can be customized to. The available outline dimensions in the E-Catalogue for the YB2 series are B3, B5, B35, B14, B34 and V1. If you are unable to find the dimensions to the mounting you prefer, please contact us for the outlining dimensions.

Related products

Quick View

Smoke Extraction Motor Series

Quick View

Carpark Barrier Gate Motors

Quick View

3 Speed Induction Motors

Quick View

HVAC Motor Series